ODIA Diver Competency & Pay Grading Matrix

ODIA Diver Competency & Pay Grading Matrix

Career Progression Requirements for UK Offshore Diving Personnel

Revision 01 - November 2014

🌊 Air/Surface Supplied Path

Air Dive School

Complete commercial dive school and obtain HSE Approved Surface Supplied Diver certification

↓

Surface Supplied Diver (D05)

Entry-level qualified commercial diver working on surface supplied equipment

↓

Professional Surface Supplied Diver

Requirements:

  • 100 surface supplied dives
  • 100 hours bottom time
  • 70 dives & 70 hours offshore/DP vessel
  • IMCA/Company competencies
  • Minimum 4 tool competencies

🔔 Closed Bell Path

Bell Diver Training

Complete HSE Approved Bell Diver Training course

↓

Bell Diver (D04)

Qualified closed bell diver working in saturation or bell bounce diving operations

↓

Professional Bell Diver

Requirements:

  • 100 surface supplied dives
  • 100 closed bell lock-outs
  • 400 lock-out hours
  • 70 dives & 70 hours offshore/DP vessel
  • IMCA/Company competencies
  • Minimum 4 tool competencies

📋 Detailed Requirements

Qualifying Dives & Lock-Outs

  • Must be performed offshore (outside 12-mile territorial waters) or on a DP vessel
  • Must be "at work" - performing actual job tasks
  • Training dives, trials, and test dives DO NOT count
  • Standby dives and dry dives DO NOT count for bell divers
  • Lock-outs must involve leaving the bell while at work

Work Experience Requirements

  • 70 hours must be with an IMCA or ADC UK member company
  • Work must be within UK Offshore ACoP (exploration & exploitation works, DP vessels, or outside territorial limits)
  • 30 hours can be in any sector with IMCA/ADC UK company
  • Logged bottom times or excursion times only count when "at work"

IMCA Core Competencies

  • Air Divers: Must complete IMCA D003 Table D-44 (Surface Supplied Diver)
  • Bell Divers: Must complete IMCA D003 Table D-39 (Bell/Saturation Diver)
  • Assessed against relevant skills as per company requirements
  • Note: Wet Bell Operations (D05/000/03) not required in UK as technique rarely used
  • Note: DP Systems (D05/000/08) only required if company uses DP vessels

Additional Skills & Tool Competencies

Minimum 4 competencies required from:

Lifting Equipment (cranes, slings, shackles, tirfors, chain hoist)
Oxy-arc/Thermal Cutting Equipment
HP Water Jetting Equipment
Grit Blasting Equipment
Bolt Tensioning Equipment
Hydraulic Tools
Air Lift Bags
Air Lift/Dredging Equipment
Mattress Handling Equipment
Metrology Equipment
Lift Planning & Rigging

Note: Companies may require additional tools/skills not listed above

⚠️ Important Distinction: Pay grading should not be confused with verification of competence. Pay grading alone does not confirm competence - only the criteria set out in this matrix. Holding a certificate of pay grading does not override ODIA Clause 16.2, where divers are paid for the designation and grade they are engaged on, not the level they are qualified to.

🔴 Critical Notes

  • Employers, clients, and regulators require competence to be obtained, demonstrated, assessed, and recorded with evidence
  • Diver advancement through ODIA pay grades must be linked to IMCA/company competence systems (Ref: ODIA Clause 11.1)
  • Once all criteria are met, employer signatory provides a certificate of acceptance of revised pay grading
  • Certificate must be signed and dated by authorized person (Operations Manager, Diving Manager, HR Manager, Safety Manager or similar)
  • Subsequent employers may contact issuing company for verification - requests will be responded to promptly
✅ Certification Process: After meeting all requirements, your employer will issue a certificate of acceptance for the revised pay grade. This certificate can be verified by future employers as part of your professional credentials.